Desert Brand Literature Catalog
Desert Brand Printed Literature
DB001
“Rain or Shine – We’ve got you Covered.”
Decking and Sealer Products Since 1923 Classic Sealer
Desert Brand Classic Sealer is a durable, weather resistant, low luster finish designed to protect magnesium oxychloride floors, decks and stairs. Desert Brand Classic Sealer is used for new installations and recoating surfaces in good condition.
Classic Sealer Color Chart Classic Sealer is also available in white and clear.
Ivory
Natural
Antique White
Natural Cream
Adobe Sand
Sandy Tan
Hazelwood
Russet Brown
Pine Green
Tile Red
Nucrete
Light Gray
(Ye to ZariatioRs iR sYrJace te\tYres QethoHs oJ aTTPicatioR aRH TriRt PiQitatioRs oJ this FrochYre the sQaPP coPor saQTPe showR caR oRP] aTTro\iQate the fiRaP coPor eJJect
(800) 994-8801 • www.desertbrand.com © Hill Brothers Chemical Co. 2023
DB001 Backside
“Rain or Shine – We’ve got you Covered.”
Decking and Sealer Products Since 1923
Lacquer Sealer 100 For a wet look. Deep penetrating, non-yellowing, high gloss sealer that can be used on various porous surfaces.
Master Seal 100 Low sheen, durable, high performance sealer. For driveways, garage floors, and high use surfaces.Water and mildew resistant.
CMFPS Low sheen. Highly durable water base finish. Available in a variety of colors, as well as clear and tint bases.
Master Seal WB High performance, lowVOC, water base sealer that is ideal on exterior/in terior porous masonry surfaces. No hot tire pickup on garage floors. Available in clear and tint bases.
Top Finish High performance, interior/exterior floor polish. Resists scuff marks and dirt retention. May be used on previously sealed magnesite and a variety of surfaces.
Paver Sealer High performance, interior/exterior clear sealer. Provides maximum durability and protection of paver tiles and other porous surfaces. Deep penetrating, non-yellowing, scuff resistant finish.
Total Sealer For a natural look. Penetrates deep into pores for long lasting protection. Highly water-resistant.
Penetrating Sealer Non-film forming, fast acting, deep penetrating sealer for porous masonry surfaces. Provides lasting protection and water resistance. Helps stop efflorescence.
For more information, go to www.desertbrand.com
Decking and Sealer Products Since 1923
A division of
(800) 994-8801 • www.hillbrothers.com
Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
DB002
“Rain or Shine – We’ve got you Covered.”
Decking and Sealer Products Since 1923
CMFPS is the perfect choice for sealing concrete/masonry patios, decks and walkways. Its acrylic formula results in a low-luster, highly durable finish. CMFPS is ideal for use on new or aged concrete walking surfaces with its deep penetrating, non-yellowing, scuff resistant characteristics. CMFPS
CMFPS Color Chart
Monterey Grey
Slate Grey
Nevada Sand
Arizona Tan
Sandalwood
Stonecrete
Buckskin
Brick Red
Forest Green
Desert Sand
VintageWhite
Mocca
CMFPS is also available in white and clear. Due to variations in surface textures, methods of application and print limitations of this brochure, the small color saQTPe showR caR oRP] aTTro\iQate the fiRaP coPor eJJect .
(800) 994-8801 • www.desertbrand.com © Hill Brothers Chemical Co. 2023
DB002 Backside
“Rain or Shine – We’ve got you Covered.”
Decking and Sealer Products Since 1923
Lacquer Sealer 100 For a wet look. Deep penetrating, non-yellowing, high gloss sealer that can be used on various porous surfaces.
Master Seal 100 Low sheen, durable, high performance sealer. For driveways, garage floors, and high use surfaces.Water and mildew resistant.
CMFPS Low sheen. Highly durable water base finish. Available in a variety of colors, as well as clear and tint bases.
Master Seal WB High performance, lowVOC, water base sealer that is ideal on exterior/in terior porous masonry surfaces. No hot tire pickup on garage floors. Available in clear and tint bases.
Top Finish High performance, interior/exterior floor polish. Resists scuff marks and dirt retention. May be used on previously sealed magnesite and a variety of surfaces.
Paver Sealer High performance, interior/exterior clear sealer. Provides maximum durability and protection of paver tiles and other porous surfaces. Deep penetrating, non-yellowing, scuff resistant finish.
Total Sealer For a natural look. Penetrates deep into pores for long lasting protection. Highly water-resistant.
Penetrating Sealer Non-film forming, fast acting, deep penetrating sealer for porous masonry surfaces. Provides lasting protection and water resistance. Helps stop efflorescence.
For more information, go to www.desertbrand.com
Decking and Sealer Products Since 1923
A division of
(800) 994-8801 • www.hillbrothers.com
Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
DB003 Frontside
“Rain or Shine, We’ve got you Covered.”
Decking and Sealer Products Since 1923
Decking, Flooring and Sealing Solutions
DB003 Inside Left
Desert Crete Decking System For new exterior walkways, balconies, and roof decks. Enhance and protect the value of your property with the Desert Crete Decking System. As a Class A-rated fire-retardant system, and exterior wildfire protection, Desert Crete is ideal for most types of exterior decks, floors, and stairs. Installed over a wood subfloor, this high-quality system is available with a variety of finished color coats using Desert Brand Sealers (CMFPS, Master Seal or Master Seal WB). • Textured, slip resistant • Waterproof • One hour fire-rated • IAPMO UES ER-586 (TI RADCO) • Meets high fire hazard zone standards • Exterior wildfire protection
Desert Brand Sealers For the look you want and the lasting protection you need.
CMFPS
• Seals concrete/masonry patios, decks & walkways • Highly durable, low luster finish • Ideal for new or aged concrete • Non-yellowing & scuff resistant • Available in clear & various colors • Available in tint bases
Master Seal WB
• High performance, low VOC sealer • Environmentally friendly • Great sealer for garage floors & driveways (resists hot tire pick up) • Fast drying • Quick recoat • UV stable • Low sheen or high gloss finish • Available in tint bases
Desert Crete
Master Seal
• High performance sealer • Perfect for high use surfaces • Use on driveways & garage floors (resists hot tire pick up) • Water & mildew resistant • Resistant to ultraviolet light • Good chemical resistance • Low sheen finish
DB003 Inside Right
Desert Flex Restoration System Restore existing walkways, balconies, and stairways.
There’s an effective and affordable way to restore damaged and leaking walking surfaces – the Desert Flex Restoration System. Recommended for restoring a wide variety of surfaces – including concrete, polymer modified concrete, and pre-sealed magnesite, just to name a few – the Desert Flex System returns your surfaces to a highly durable and water-resistant state. • Tough yet flexible • Acrylic and fiberglass construction • Textured slip resistant • Install it on new cement walkways and decks too • Easy to maintain
Desert Flex
Ideally suited to finish Desert Crete and Desert Flex Systems, or any concrete surface, the high quality stone, brick, and tile patterns of the Texture/Overlay System give your surface a touch of sophistication. Available in a wide range of colors, textures, and patterns, the Desert Crete Overlay System uses high performance acrylic modi fied cements combined with a unique pigmen tation process for a creative and durable finish. Desert Crete Texture/Overlay System For Driveways, Patios, Pool Decks, and more.
• Slip resistant • Water resistant • Non-combustible • Excellent tensile, compressive and bond strengths
DB003 Backside
Decking and Sealer Products Since 1923
Choose Desert Brand Sealers Family of Products for the look you want and the lasting protection you need.
(800) 994-8801 • www.desertbrand.com
A division of
www.hillbrothers.com
Corporate HQ & International Sales (800) 994-8801
Southern California Northern California Phoenix Arizona
Tucson,Arizona Utah/Pacific No rthwest
(800) 438-8515
(800) 438-8515
(888) 866-2210 (888) 866-2210
(800) 336-3911
DB004
For Driveways, Patios, Pool Decks, Entryways, Balconies, and Walkways
Decking & Sealer Products Since 1923
DB004 Backside
The Desert Crete Teture/Overlay System is ideal for surfacing aged or newly poured concrete surfaces and can be used to attractively finish Desert Crete or Desert Flex Systems. This high quality interior and exterior surfacing system employs high performance acrylic modified cements and when combined with any colorant for Portland cement will provide unlimited color choices. Use with designs made with tape or stencils to create the desired pattern.
APPROPRIATE TAPE OR STENCIL
(800) 994-8801 www.desertbrand.com Decking and Sealer Products Since 1923
(800) 994-8801 • www.hillbrothers.com Southern California Northern California Phoenix, Arizona Tucson, Arizona
Utah/Pacific Northwest
(800) 438-8515
(888) 866-2210
(888) 866-2210
(800) 336-3911
DB005
High Performance Water-Based Sealer Master Seal WB “Rain or Shine – We’ve got you Covered.”
• Ideal for Any Concrete Surface • Acrylic-Urethane – Nanotechnology • Resists Hot Tire Pickup • Low VOC • UV Stable • Prevents Slips • Fast Drying • Quick Recoat Time • IAPMO UES ER-586 (TI RADCO)
• Available in Clear Gloss, Low Sheen & Tintable Bases
Decking and Sealer Products Since 1923
(For color choices see a distributor)
(800) 994-8801 • www.desertbrand.com
DB005 Backside
Decking and Sealer Products Since 1923
Choose Desert Brand Products for the look you want and the lasting protection you need.
• CMFPS (Concrete/Masonry Sealer) • Master Seal • Lacquer Sealer 100 • Total Sealer • Classic Sealer
A division of
www.hillbrothers.com
Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
DB006
Etch-Off
Decking and Sealer Products Since 1923
A Fully Biodegradable and Safe Concrete Etcher and Cleaner Harmless to Plants • Earth Friendly
Safely removes Efflorescence from Mansonry, Brick, Mexican Pavers and Tile Grout
Ideal for cleaning white, chalky deposits on pool decks and planters.
Cleans and etches concrete for surface coating preparation
(800) 994-8801 • www.desertbrand.com
DB006 Backside
Decking and Sealer Products Since 1923
Choose Desert Brand Products for the look you want and the lasting protection you need.
• CMFPS (Concrete/Masonry Sealer) • Master Seal • Lacquer Sealer 100 • Total Sealer • Classic Sealer
A division of
www.hillbrothers.com
Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
“Rain or Shine, We’ve got you Covered.” DB007 Tri-Fold Pamphlet
Decking and Sealer Products Since 1923
Sealer Products for Masonry and Deck Surfaces
DB007 Inside fold
Penetrating Sealer
• For use on porous masonry surfaces • Helps prevent efflorescence • Works as a grout release • Protects unsealed grout • Protects stucco from staining • Water based
Total Sealer
• High performance penetrating sealer • “Natural look” finish (no shine)
• Long lasting protection • Highly water resistant • For stucco
• For masonry surfaces • Resists wind driven rain • Forms seal below the surface • Water based
Surface Coating Preparation
• Safely cleans & removes efflorescence from masonry surfaces • Cleans & etches concrete • Environmentally friendly • Harmless to plants • Solvent based
DB007 Inside Fold
CMFPS
• Seals concrete/masonry patios, decks & walkways • Highly durable, low luster finish
• Ideal for new or aged concrete • Non-yellowing & scuff resistant • Available in clear & various colors • Available in tint bases • Water based
Classic Sealer
• Protects Magnesite walkways, stairs, & decks • Maximum durability
• High gloss finish • Great for stamped concrete & concrete overlays • Great for interlocking pavers & manufactured stone • Excellent for concrete countertops • Solvent based
DB007 Inside Fold
Master Seal WB
• High performance, lowVOC sealer • Environmentally friendly
• Great sealer for garage floors & driveways (resists hot tire pick up) • Fast drying • Quick recoat • UV stable • Low sheen or high gloss finish • Available in tint bases • Water based
Paver Sealer
• Developed specifically for paver tiles • Perfect for other porous masonry surfaces • High performing sealer • Dries clear • Water based
Top Finish
• Interior/exterior acrylic floor polish • Scuff resistant • Resistant to dirt retention • Works well in high traffic areas • Excellent maintenance coat that protects sealed surfaces • Water based
DB007 Inside Fold
Master Seal
• High performance sealer • Perfect for high use surfaces
• Use on driveways & garage floors (resists hot tire pick up) • Water & mildew resistant • Resistant to ultraviolet light • Good chemical resistance • Low sheen finish • Solvent based
Lacquer Sealer 100
• LowVOC lacquer sealer • Deep penetrating wet look sealer
• High gloss finish • Great for stamped concrete & concrete overlays • Great for interlocking pavers & manufactured stone • Excellent for concrete countertops • Solvent based
DB007 Backside
Choose Desert Brand Sealers family of products for the look you want and the lasting protection you need.
Decking and Sealer Products Since 1923 www.desertbrand.com
A division of
www.hillbrothers.com Corporate HQ & International Sales: (800) 994-8801
Southern California: (800) 438-8515 Northern California: (800) 438-8515 Phoenix, Arizona: (888) 866-2210 Tucson, Arizona: (888) 866-2210 Utah/Pacific Northwest: (800) 336-3911
DB008 Presentation Folder
“Rain or Shine, We’ve Got You Covered.”
Decking and Sealer Products Since 1923
Decking Systems and Professional Grade Sealers
DB008 Interior Left S ide
Desert Brand Products Desert Brand Decking Products • Level Max 20/30 • Poly Base • Desert Brand PDF • Desert Crete Liquid Polymer • Bonder 480 • CMFPS Color Coat Decking Systems • Desert Crete Texture/Overlay System • Desert Crete Pool Deck Finish • Desert Crete • Desert Flex Sealers and Finishes Pigmented Clear • Classic Sealer • Penetrating Sealer • CMFPS • Paver Sealer • Top Finish Tint Bases • Lacquer Sealer • CMFPS • Total Sealer • Master Seal WB • Master Seal • Del Rio Seal II • Master Seal WB
Others • Etch-Off • Retarder
DB008 Interior Right Side
Decking and Sealer Products Since 1923
DB008 Backside
Decking and Sealer Products Since 1923
(800) 994-8801 www.desertbrand.com
A division of
(800) 994-8801 • www.hillbrothers.com Corporate HQ & International Sales (800) 994-8801
Southern California Northern California Phoenix Arizona
Tucson,Arizona Utah/Pacific No rthwest
(800) 438-8515
(800) 438-8515
(888) 866-2210 (888) 866-2210
(800) 336-3911
DB009 3 Ring Binder - includes all DB literature
DESERT BRAND
“Rain or Shine, We’ve got you Covered.”
Decking and Sealer Products Since 1923
Specifications & Procedures for Installation & Maintenance for Architects & Authorized Applicators
(800) 994-8801 • www.desertbrand.com Decking Systems • Professional-grade Sealers
Floors Decks Stairs Sealers
A division of
Corporate HQ & International Sales (800) 994-8801 www.hillbrothers.com Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
Divsions 3,7 & 9
TB106
Classic Sealer Technical Bulletin
Decking and Sealer Products Since 1923
D
esert Brand Classic Sealer is designed speci cally for maximum durability and protection of magne site (magnesium oxychloride) surfaces, providing an attractive, long-lasting, low-luster nish that is especially weather and scuff resistant. Formulated with the nest acrylic resins and raw materials available in the paint and coatings industry, Desert Brand Classic Sealer is available in a wide variety of colors, including white and clear. Classic Sealer Clear will enhance the natural beauty, nish, and texture of newly installed magnesite oors and stairs, while Classic Sealer Pigmented is primarily used for aged surfaces that may be discolored, patched, or worn.
INSTRUCTIONS FOR USE AND APPLICATION Classic Sealer is a non-viscous product designed for maximum penetration of the surface. Clean equipment and hands with an appropriate thinner, such as Desert Brand Retarder. Do not use mineral spirits. CLEAN SURFACE: • Make sure surface is clean and free of grease, oil, dirt, wax, or other foreign matter. • Clean with a detergent solution, rinse fully, and allow surface to dry. PREPARE SURFACE: • Fill any small, objectionable cracks in the surfaces of decks and stairs using Desert Brand Crack Filler. Allow to dry thoroughly before proceeding. • Apply a small amount of sealer to test for possible lifting. APPLY CLASSIC SEALER: • Use as packaged – thinning is not necessary. • During warm weather, Desert Brand Retarder may be added to increase drying time. Use no other solvents or thinners. • Mix sealer thoroughly. • Use spray equipment or a ne-textured sponge, brush, or roller to apply. • It is recommended to use a 3/8" nap roller with a dralon, woven, or lintless roller cover. • Apply an even coating when surface temperature is between 55° and 85°F. • If a touch up is necessary after the coating has set (about 5 minutes), rewet the roller or brush before reapplication. DOUBLE UP: • Two or more applications may be necessary depending upon surface porosity. • Two thin applications will provide better protection and performance than one heavy application. • Allow 24 hours between coats. • Drying and recoat times are dependent on temperature, humidity and lm thickness. PRECAUTIONS: • It is recommended that traf c remain off of the sealed surface for eight hours. Under normal conditions, limited traf c may be permitted after two to three hours, if necessary. • Add slip resistant materials to Classic Sealer to increase slip resistant properties if needed. Warning: Possible Slipperiness – Like any quality nish, Classic Sealer reduces the porosity of the surface being sealed. Be aware that oil, water, mud, or other materials on a sealed walkway can make the surface slippery and therefore, potentially dangerous. Good housekeeping and maintenance are important, proper drainage is imperative.
TECHNICAL DATA Classic Sealer
Pigmented
Clear <450
VOC (mg/L): Solids (wt.%):
<450 45-49
30 24
Volume Solids (%) Density (lbs/gal): Viscosity (cps): ASTM D3363-05 test for lm hardness ASTM D3359-09 test measuring adhesion (substrate dependent) Coverage (Average sq. ft., per coat @ 1mil): Coverage rates are dependent on surface conditions and application techniques. Shelf Life:
34
8.5-9
7.43
1000±200
200+
2H
2H
4-5
4-5
450-550
350-450
3 years
Packaging: 1 & 5 Gallon For additional information, please refer to Safety Data Sheet (SDS). For maintenance information, please refer to Desert Brand Technical Bulletin TB141: Maintenance and Care of Desert Brand Sealers CLEANING OF EQUIPMENT: • Tools and hands may be cleaned with an aromatic-type lacquer thinner. • Do not use paint base spirits. • Disposal of any unused material must comply with local, state, and federal regulations. The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce.
800.994.8801 1675 N. Main St · Orange, CA 92867 LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT © Hill Brothers Chemical 2019
www.desertbrand.com
TB106 6/2019
TB106 Backside
Decking and Sealer Products Since 1923
Choose Desert Brand Products for the look you want and the lasting protection you need.
www.desertbrand.com
A division of
(800) 994-8801 • 1675 N. Main St. • Orange, CA 92867 • www.hillbrothers.com Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
TB108
Paver Sealer Technical Bulletin
Decking and Sealer Products Since 1923
D esert Brand Paver Sealer is a high-performance acrylic/urethane clear sealer developed speci cally for porous paver tiles and other porous masonry surfaces. Paver Sealer is an interior/exterior sealer formulated to enhance and provide maximum durability and protection of porous paver tiles; thereby, providing a deep penetrating, non-yellowing, scuff resistant nish. The sealer is not recommended for non-porous or dense surfaces.
CLEAN SURFACE: • Make sure surface is free of grease, oil, dirt, wax, polish or other foreign matter. PREPARE SURFACE: • Make certain that the bond to any previously applied stain or sealer is secure. • On newly installed tile, allow 24 to 48 hours for grout joints to dry thoroughly before applying. • Apply a small amount of sealer to test for possible lifting. APPLICATION: • Stir contents thoroughly. • Use a ne textured sponge, brush, roller, or with spray equipment. • Apply as is. Do not dilute. • Apply an even coating when surface temperature is between 55° and 85°F. DOUBLE UP: • Two or more applications may be necessary to achieve maximum abrasion and stain resistant qualities. • Two or more coats may be necessary depending upon surface porosity and desired nish. • Allow 2 to 3 hours between coats. • Drying and recoat times are dependent on temperature, humidity and lm thickness. PRECAUTIONS: • Foot traf c should remain off of the sealed surface for 24 hours. • For heavy foot traf c allow 72 hours for proper curing. • Protect the sealed tile oor from excessive and prolonged exposure to foods and greases. MAINTENANCE: • For additional scuff resistance use Desert Brand Top Finish. CLEANING OF EQUIPMENT: • Equipment and hands may be cleaned with mild liquid detergent and warm water. • Dry material can be removed with lacquer thinner, follow manufac turer’s precautions. • Disposal of any unused material must comply with local, state, and federal regulations. The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce.
TECHNICAL DATA
Data
Paver Sealer Milky white (dries clear)
Color in Container:
VOC (mg/L):
<100 21% 19%
Typical Solids (%): Volume Solids (%):
Typical Density (lbs/gal): Chemical Resistance:
8.5 lbs./gal 24 hrs under watch glass
Coverage (Average sq. ft., per coat @ 1mil):
200-300
Coverage rates are dependent on surface conditions and application techniques.
ASTM D3359
5
Test measuring adhesion.
Storage:
Cool dry place. Do not allow to freeze. 12 months in unopened container
Shelf Life:
Packaging:
1, 5 and 55 gallon containers
For additional information, please refer to Safety Data Sheet (SDS). For maintenance information, please refer to Desert Brand Technical Bulletin TB141: Maintenance and Care of Desert Brand Sealers.
Warning – Like any quality nish, Paver Sealer reduces the porosity of the surface being sealed. Be aware that oil, water, mud, or other materi als on a sealed walkway can make the surface slippery. Good house keeping and maintenance are important, proper drainage is imperative.
Manufactured by
800.994.8801 1675 N. Main St · Orange, CA 92867 LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT © Hill Brothers Chemical 2019
www.desertbrand.com
TB108 9/2019
TB108 Backside
Paver Sealer “Rain or Shine – We’ve got you Covered.”
Decking and Sealer Products Since 1923 Keep Your Surface Looking Great for Years
• Designed for porous masonry surfaces such as tile, concrete, brick, and stone • High-performance acrylic-urethane sealer • Dries clear with a semi-gloss finish • Provides maximum durability and protection •Water-resistant
(800) 994-8801 • www.desertbrand.com
TB110
Top Finish Technical Bulletin
Decking and Sealer Products Since 1923
D esert Brand Top Finish is a high-performance, interior/exterior acrylic oor polish designed to provide exceptional resistance to scuff marks and dirt retention when applied to high traf c areas. Top Finish is low VOC, easy to use, self polishing and buffable and is intended for commercial and residential use. It may be applied over several types of ooring including epoxy, polyurethane and acrylic coated oors, vinyl ooring, tile ooring and previously sealed magnesite and masonry type surfaces.
CLEAN SURFACE: • Make sure surface is free of grease, oil, dirt, wax, polish or other foreign matter. PREPARE SURFACE: • Make certain that the bond to any previously applied stain or sealer is secure. • On newly sealed surface, allow 24 to 48 hours for the sealer to cure before applying. • Apply a small amount of sealer to test for possible lifting. APPLICATION: • Shake contents gently before use. • Use a ne textured sponge or brush. • Apply as is. Do not dilute. • Apply an even coating when surface temperature is between 55° and 85°F. DOUBLE UP: • Two applications may be necessary depending upon surface porosity. • For a higher shine a second coat is recommended. • Allow 2 to 3 hours between coats. • Drying and recoat times are dependent on temperature, humidity and lm thickness. PRECAUTIONS: • During application use latex or protective gloves. • Use only with adequate ventilation. • Foot traf c should remain off of the sealed surface for 2 to 3 hours. MAINTENANCE: • High traf c areas, reapply 1 to 2 coats every 3 months. • Standard traf c areas, reapply 1 to 2 coats two times a year. • Low traf c areas, reapply 1 to 2 coats once a year. • After several applications, complete removal and re-application may be required. Warning – Like any quality nish, Top Finish reduces the porosity of the surface being sealed. Be aware that oil, water, mud, or other materials on a sealed walkway can make the surface slippery. Good housekeeping and maintenance are important, proper drainage is imperative. The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce.
TECHNICAL DATA Data Color in Container:
Top Finish Milky white (dries clear)
VOC (mg/L):
6.8% 25%
Typical Solids: Typical Density:
8.6 lbs./gal
pH:
8 to 9
Chemical Resistance:
Avoid exposure to extreme alkaline and acid substances
Coverage (Average sq. ft., per coat @ 0.8 -0.4 mil): Coverage rates are dependent on surface conditions and application techniques.
500-1000
Adhesion ASTM D3359
4-5
Storage:
Cool dry place. Do not allow to freeze. 12 months in unopened container
Shelf Life:
Packaging:
1, 5 and 55 gallon containers
CLEANING OF EQUIPMENT: • Equipment and hands may be cleaned with mild liquid detergent and warm water. • Dry material can be removed with Desert Brand Retarder, follow manu facturer’s precautions. • Disposal of any unused material must comply with local, state, and federal regulations. For additional information, please refer to Safety Data Sheet (SDS). For maintenance information, please refer to Desert Brand Technical Bulletin TB141: Maintenance and Care of Desert Brand Sealers.
Manufactured by
800.994.8801 1675 N. Main St · Orange, CA 92867 LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT © Hill Brothers Chemical 2019
www.desertbrand.com
TB110 9/2019
Top Finish “Rain or Shine – We’ve got you Covered.” TB110 Backside
Decking and Sealer Products Since 1923
Keep Your Surface Looking Great for Years
• Excellent maintenance coat for sealed surfaces • Provides a high-gloss finish • Great for high traffic areas • Provides exceptional resistance to dirt & scuff marks • Slip-resistant • Easy to use
(800) 994-8801 • www.desertbrand.com
TB111
Penetrating Sealer Technical Bulletin
Decking and Sealer Products Since 1923
D esert Brand Penetrating Sealer is a deep-penetrating, non- lm forming (invisible), fast-acting sealer designed for porous paver tile and masonry surfaces. When applied, Penetrating Sealer reaches deep into the pore structure creating a breathable, highly water resistant surface which in most applications, will not allow water to penetrate. On above-ground exterior masonry, Penetrating Sealer helps preserve the surface from spalling, cracking, discoloration, and ef orescence. It also reduces staining and helps maintain the surface clean.
CLEAN SURFACE: • Make sure surface is free of grease, oil, dirt, wax, polish or other foreign matter. PREPARE SURFACE: • On newly installed tile, allow 24 to 48 hours to dry thoroughly before applying sealer. • Prior to the application of a water-based coating or nish, when using as a grout release, it is recommended to test for possible lifting. APPLICATION: • Use a ne textured sponge or low pressure tank sprayer. • Liberal application and generous overlapping is recommended. • Make certain to wipe off any excess sealer that is not absorbed. Excessive unabsorbed sealer will cause a white deposit to appear. • Apply an even coating when surface temperature is between 55° and 85°F. • Drying times are dependent on temperature, humidity and lm thickness. PRECAUTIONS: • Foot traf c should remain off of the sealed surface for 2 to 3 hours. • It is not recommended for basement or underground masonry. Under hydrostatic pressure water may penetrate the treated surface. CLEANING OF EQUIPMENT: • Equipment and hands may be cleaned with mild liq-uid detergent and warm water before sealer is allowed to dry. • Disposal of any unused material must comply with local, state, and federal regulations.
TECHNICAL DATA
Data
Penetrating Sealer
Color in Container:
Clear 1.3%
VOC (g/L):
Typical Solids (wt%):
3% 8.5
Typical Density (Lbs/Gal):
Coverage (Average sq. ft., per coat): Coverage rates are dependent on surface conditions and application techniques.
100-700
Storage:
Cool dry place. Do not allow to freeze.
Shelf Life:
12 months in unopened container
Packaging:
1, 5 and 55 gallon containers
For additional information, please refer to Safety Data Sheet (SDS). For maintenance information, please refer to Desert Brand Technical Bulletin TB141: Maintenance and Care of Desert Brand Sealers.
Warning – Like any quality nish, Penetrating Sealer reduces the porosity of the surface being sealed. Be aware that oil, water, mud, or other materials on a sealed walkway can make the surface slippery. Good housekeeping and maintenance are important, proper drainage is imperative. The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce.
Manufactured by
800.994.8801 1675 N. Main St · Orange, CA 92867 LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT © Hill Brothers Chemical 2019
www.desertbrand.com
TB111 8/2019
TB111 Backside
“Rain or Shine – We’ve got you Covered.”
Penetrating Sealer
Decking and Sealer Products Since 1923 Keep Your Surface Looking Great for Years
• Designed for porous masonry surfaces such as tile, concrete, brick, and stone • Provides a natural look • Protects stucco from staining • Prevents efflorescence • Protects unsealed grout and works as grout release •Water-resistant
(800) 994-8801 • www.desertbrand.com
TB113
Lacquer Sealer Technical Bulletin
Decking and Sealer Products Since 1923
D esert Brand Lacquer Sealer is a high-performance clear sealer manufactured speci cally for porous masonry surfaces such as exposed aggregate decorative, stamped, or overlaid concrete, brick, slate, Saltillo tile, manufactured stone and other various porous concrete surfaces. It is suitable for exterior applications where a deep penetrating, non-yellowing, high-gloss (wet look) appearance is desired. Desert Brand Lacquer Sealer will retard ef orescence of most cured masonry surfaces.
CLEAN SURFACE: • Make sure surface is free of grease, oil, dirt, wax, polish or other foreign matter. PREPARE SURFACE: • Make certain that the bond to any previously applied stain or sealer is secure. • Apply a small amount of sealer to test for possible lifting. • New concrete surfaces must be aged at least 28 days prior to applying sealer. • Allow for grout joints to dry thoroughly on newly installed tile or brick. • It is recommended to remove all previously applied sealers. APPLICATION: • Stir contents thoroughly. • Use a ne textured sponge, brush, roller, or spray equipment. • Apply as is. Do not thin. • Apply an even coating when surface temperature is between 55° and 85°F. DOUBLE UP: • Two applications may be necessary depending upon surface porosity. • Allow 24 hours between coats. • Drying and recoat times are dependent on temperature, humidity and lm thickness. PRECAUTIONS: • Use only with adequate ventilation. • Apply with care and caution, it is a solvent-based ammable sealer. • Foot traf c should remain off of the sealed surface for 24 hours. Heavy foot traf c, allow 72 hours. • Not recommended for non-porous or dense surfaces. CLEANING OF EQUIPMENT: • Equipment and hands may be cleaned with Desert Brand Retarder. Do not use mineral spirits. • Disposal of any unused material must comply with local, state, and federal regulations.
TECHNICAL DATA
Data
Lacquer Sealer 100 Lacquer Sealer 600
Color in container:
Clear <100
Clear <600 25-34 20-28
VOC (mg/L):
Typical Solids (wt.%): Volume Solids (%):
22.87±0.5
18
Typical Density (lbs/gal): 7.41
7.46-7.80
Viscosity (cps):
10-100
20-300
Coverage (Average sq. ft., per coat @ 1mil):
200-290
220-450
Coverage rates are dependent on surface conditions and application techniques.
Storage: Shelf Life: Packaging:
Cool dry place. Do not allow to freeze. 3 years in unopened containter.
1, 5 and 55 gallon containers.
For additional information, please refer to Safety Data Sheet (SDS).
For maintenance information, please refer to Desert Brand Technical Bulletin TB141: Maintenance and Care of Desert Brand Sealers.
The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce.
Warning – Like any quality nish, Lacquer Sealer reduces the porosity of the surface being sealed. Be aware that oil, water, mud, or other materials on a sealed walkway can make the surface slippery. Good housekeeping and maintenance are important, proper drainage is imperative.
Manufactured by
800.994.8801 1675 N. Main St · Orange, CA 92867 LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT © Hill Brothers Chemical 2020
www.desertbrand.com
TB113 3/2020
TB113 Backside
“Rain or Shine – We’ve got you Covered.”
Decking and Sealer Products Since 1923
Choose Desert Brand Products for the look you want and the lasting protection you need.
www.desertbrand.com
A division of
(800) 994-8801 • 1675 N. Main St. • Orange, CA 92867 • www.hillbrothers.com Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
TB114
Concrete/Masonry Floor Paint & Sealer (CMFPS) Technical Bulletin
Decking and Sealer Products Since 1923
D
esert Brand Concrete/Masonry Floor Paint and Sealer (CMFPS) is a superior performance, acrylic latex oor coating formulated to enhance and protect new or aged concrete/masonry walking surfaces including previously sealed magnesium oxychloride oors, decks, and stairs. Its durable, low luster nish seals concrete/masonry porches, patios, decks, and walkways providing a deep penetrating, scuff-resistant nish.
TECHNICAL DATA
CLEAN SURFACE: • Make sure surface is free of grease, oil, dirt, wax, or other foreign matter. • If necessary scrape or wire brush and sand previously applied coatings. PREPARE SURFACE: • To control ef orescence on new or unpainted concrete use Desert Brand Etch-Off or other acid solution. • Rinse and neutralize thoroughly. • Allow a minimum of 24 hours to dry. • For all masonry repairs use Desert Brand Concrete/Masonry crack lling and patching products. • Apply a small amount of sealer to test for possible lifting. APPLICATION: • Stir contents thoroughly. • Use a synthetic or nylon bristled brush or a nap roller . • For smooth surface use 1/4” nap roller and for a rough surface use 3/8”-1/2” nap roller. • Apply an even coating when surface temperature is between 55° and 85°F. DOUBLE UP: • Two thin applications may be necessary depending upon surface porosity. • Allow 24 hours between coats. • Drying and recoat times are dependent on temperature, humidity and lm thickness. PRECAUTIONS: • Foot traf c should remain off of the sealed surface for 24 hours. • For heavy foot traf c, allow 72 hours. • CMFPS is not recommended for concrete garage oors or other surfaces where vehicles are parked, tires may cause some lifting of the coating. • Do not allow CMFPS to freeze, material will not thaw to a usable product. CLEANING OF EQUIPMENT: • Equipment and hands may be cleaned with mild liquid detergent and water. • Dry material can be removed with acrylic lacquer thinner, follow manufacturer’s cautions. • Disposal of any unused material must comply with local, state, and federal regulations. TINTING: • White Base CMFPS may be tinted to achieve a desirable pastel shade. Use universal colorants only and do not exceed 4 oz. of tint to one gallon. Warning: Possible Slipperiness – Like any quality nish, CMFPS reduces the porosity of the surface being sealed. Be aware that oil, water, mud, or other materials on a sealed walkway can make the surface slippery and therefore, potentially dangerous. Good housekeeping and maintenance are important, proper drainage is imperative.
Data
CMFPS CLEAR CMFPS PIGMENTED
Color in container: VOC (mg/L): Typical Solids (wt.%):
Clear
Varies
<100
<100
25% 23%
50% 39%
Volume Solids (%) Typical Density (lbs/gal): ASTM D3363-05 Test for lm hardness ASTM D3359-09 Test measuring adhesion Coverage (Average sq. ft., per coat @ 1mil): Coverage rates are dependent on surface conditions and application techniques.
8.6±0.2
10.1±0.5
H
H
4-5
4-5
300-400
400-600
Storage: Shelf Life: Packaging:
40° - 90°F
3 years
1 gallon and 5 gallon pails
For additional information, please refer to Safety Data Sheet (SDS). For maintenance information, please refer to Desert Brand Technical Bulletin TB141: Maintenance and Care of Desert Brand Sealers The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce. Manufactured by
800.994.8801 1675 N. Main St · Orange, CA 92867 LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT © Hill Brothers Chemical 2019
www.desertbrand.com
TB114 5/2019
TB114 Backside
Decking and Sealer Products Since 1923
Choose Desert Brand Products for the look you want and the lasting protection you need.
www.desertbrand.com
A division of
(800) 994-8801 • 1675 N. Main St. • Orange, CA 92867 • www.hillbrothers.com Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
TB115
Desert Crete Flex Restoration System Technical Bulletin
Decking and Sealer Products Since 1923
D
CLEAN SURFACE: • Existing deck surface must be dry, clean, free of grease, oil, dirt, wax, or other foreign matter. PREPARE SURFACE: • Make certain that the bond to any previously applied coatings or deck system are secure prior to installation. • Use Desert Crete Level Max 20/30 with Desert Crete Polymer 550 for repairs and sloping requirements. APPLICATION: • Apply Bonder 480 and berglass matting to the existing deck surface as described in Technical Bulletin for Bonder 480 (TB112). • Allow 24 hours for drying before proceeding. • Apply a thin-troweled application of Desert Crete Texture, thoroughly mixed with Desert Crete Liquid Polymer, upon the dried Bonder 480 and berglass surface. • Allow thin-troweled application to dry thoroughly before proceeding (1-2 hours depending upon conditions). • Apply Desert Crete Texture, thoroughly mixed with Desert Crete Liquid Polymer, by using a pneumatic hopper gun equipped with a 1/8” ori ce and a medium setting in the circular spray plate. Recommended air pressure for application is between 30-40psi. • Allow 5-10 minutes before knocking down the splattered texture with a steel trowel, 3-5 minutes if temperature is greater than 85°F (keep the surface of the steel trowel damp with water while knocking down the splattered texture). • Allow 1– 2 hours for drying before proceeding. • Apply 1-2 coats of Desert Brand CMFPS, Desert Brand Master Seal Desert Flex is designed for use upon existing deck systems as concrete, polymer modi ed concrete, pre-sealed magnesite, elastomeric and other various proprietary systems. It may also be used as a top coat system to the Desert Crete System (subsequent to second Desert Crete Base application). esert Crete Flex Deck Restoration System is designed to restore the original integrity of an existing walk deck system plus its waterproo ng characteristics. Desert Flex will also enhance the overall aesthetic appeal of any building. The Desert Flex System utilizes high quality acrylic resins combined with premium berglass reinforcement followed by a handsome knockdown troweled nish.
MIXING AND COVERAGE
Desert Crete Product Liquid Mix
Coverage
Texture (50 lbs.)
Polymer 550 (1-1 ¼ gal.)
~200 sq. ft.
Bonder 480
~50 sq. ft.
(50 lbs.)
Level Max 20/30
Polymer 550 (1-1 ½ gal.)
~50 sq. ft./gal
at 1 / 8” thick
(50 lbs.)
For additional information, please refer to Safety Data Sheet (SDS).
• Drying and recoat times are dependent on temperature, humidity and lm thickness. • Periodically maintain system by applying a coat of Desert Brand CMFPS, Desert Brand Master Seal WB, or Master Seal sealer. PRECAUTIONS: • All materials are recommended to be used when temperature is between 50° and 85°F. • Desert Crete Liquid Polymer must be used without diluting with water. • Do not allow Bonder 480, Desert Crete Liquid Polymer, and Desert Brand CMFPS, Desert Brand Master Seal WB or Desert Brand Master Seal sealer to freeze. • Foot traf c should remain off of the sealed surface for 24 hours. Heavy foot traf c, allow 72 hours. CLEANING OF EQUIPMENT: • Thoroughly clean equipment and hands with mild liquid detergent and water immediately after use. • Disposal of any unused material must comply with local, state, and federal regulations. The information in this technical bulletin is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose. Sales speci cations, although current at time of publication, are subject to change due to process improvements. For latest product speci cations, contact our nearest sales of ce.
800.994.8801
WB, or Desert Brand Master Seal sealer. • Allow 24 hours dry time between coats.
LOCATIONS: City of Industry · San Jose, CA Phoenix · Tucson, AZ • Salt Lake City, UT
© Hill Brothers Chemical 2022
www.desertbrand.com
TB115 3/2022
TB115 Backside
“Rain or Shine – We’ve got you Covered.”
Desert Flex Deck Restoration System
Decking and Sealer Products Since 1923
www.desertbrand.com
A division of
(800) 994-8801 • www.hillbrothers.com
Corporate HQ & International Sales (800) 994-8801 Southern California Northern California Phoenix, Arizona Tucson, Arizona Utah/Pacific Northwest (800) 438-8515 (800) 438-8515 (888) 866-2210 (888) 866-2210 (800) 336-3911
Made with FlippingBook flipbook maker